Aluminum is widely acknowledged as one of the most versatile materials available today. Due mainly to a unique combination of characteristics, there is an aluminum alloy to fit almost any application imaginable.
One of aluminum’s most appealing properties is a high resistance to corrosion due to the natural oxide film that forms when it is exposed to air. Some aluminum alloys are stronger than structural steel, yet all the alloys are light in weight.
Download our current Aluminum Stock Guide.

Available Alloys
1100
Good machinability, good mechanical properties, excellent free cutting properties.
Shapes/Form and Manufacturing Methods Available
Round Tube
Extruded Seamless
Description to come.
Shapes/Form and Manufacturing Methods Available
Coil
Standard Mill Finish
Description to come.
Shapes/Form and Manufacturing Methods Available
Coil
Standard Mill Finish
Sheet
Standard Mill Finish
Plate
Standard Mill Finish
2011
Good machinability, good mechanical properties, excellent free cutting properties.
Shapes/Form and Manufacturing Methods Available
Round Bar
Cold Finished
Hex Bar
Cold Finished
2024
High strength, formability and workability is fair, may be spot welded.
Shapes/Form and Manufacturing Methods Available
Round Bar
Cold Finished
Square Bar
Cold Finished
Rectangle Bar
Cold Finished
Extruded
Hex Bar
Cold Finished
Extruded
Plate
General Engineering Quality
Aircraft Quality
High strength, formability and workability is fair, may be spot welded.
Shapes/Form and Manufacturing Methods Available
Round Tube
Cold Finish
Sheet
Bare Sheet
High strength, formability and workability is fair, may be spot welded.
Shapes/Form and Manufacturing Methods Available
Round Bar
Cold Finished
Square Bar
Cold Finished
Hex Bar
Cold Finished
High strength, formability and workability is fair, may be spot welded.
Shapes/Form and Manufacturing Methods Available
Rectangle Bar
Extruded
High strength, formability and workability is fair, may be spot welded.
Shapes/Form and Manufacturing Methods Available
Rectangle Bar
Extruded
High strength, formability and workability is fair, may be spot welded.
Shapes/Form and Manufacturing Methods Available
Sheet
Bare Sheet
Clad Sheet
3003
General purpose, moderate strength, good workability and weldability, high resistance to corrosion.
Shapes/Form and Manufacturing Methods Available
Sheet
Standard Mill Finish
5005
Description to come.
Shapes/Form and Manufacturing Methods Available
Sheet
Standard Mill Finish
Coil
Standard Mill Finish
5052
Description to come.
Shapes/Form and Manufacturing Methods Available
Coil
Standard Mill Finish
Sheet
Standard Mill Finish
Plate
Standard Mill Finish
Description to come.
Shapes/Form and Manufacturing Methods Available
Sheet
Standard Mill Finish
Description to come.
Shapes/Form and Manufacturing Methods Available
Sheet
Standard Mill Finish
5657
Description to come.
Shapes/Form and Manufacturing Methods Available
Coil
Standard Mill Finish
Sheet
Standard Mill Finish
Plate
Standard Mill Finish
6013
Description to come.
Shapes/Form and Manufacturing Methods Available
Plate
Standard Mill Finish
6020
Description to come.
Shapes/Form and Manufacturing Methods Available
Round Bar
Standard Mill Finish
6061
One of the most versatile of heat-treatable alloys, good formability and high resistance to corrosion, medium strength relative to 2000 or 7000 alloys.
T6511 is heat-treated, stress relieved, then artificially aged.
Shapes/Form and Manufacturing Methods Available
Round Bar
Cold Finished
Extruded
Square Bar
Extruded
Rectangle Bar
Extruded
Extruded – Manifold quality
Hex Bar
Cold Finished
Extruded
Round Tube
Extruded Seamless
Extruded Structural
Plate
Standard Mill Finish
One of the most versatile of heat-treatable alloys, good formability and high resistance to corrosion, medium strength relative to 2000 or 7000 alloys.
T6511 is heat-treated, stress relieved, then artificially aged.
Shapes/Form and Manufacturing Methods Available
Rectangle Bar
Extruded
One of the most versatile of heat-treatable alloys, good formability and high resistance to corrosion, medium strength relative to 2000 or 7000 alloys.
Shapes/Form and Manufacturing Methods Available
Sheet
Standard Mill Finish
One of the most versatile of heat-treatable alloys, good formability and high resistance to corrosion, medium strength relative to 2000 or 7000 alloys.
Shapes/Form and Manufacturing Methods Available
Sheet
Standard Mill Finish
One of the most versatile of heat-treatable alloys, good formability and high resistance to corrosion, medium strength relative to 2000 or 7000 alloys.
Shapes/Form and Manufacturing Methods Available
Round Bar
Extruded
Cold Finished
Square Bar
Extruded
Hex Bar
Extruded
I Beam
Extruded, American Standard
I Beam
Extruded, Aluminum Association
Angle
Extruded, Aluminum Association
Square Tube
Extruded
Sheet
Standard Mill Finish
Plate
Standard Mill Finish
Channel
Extruded, Aluminum Association
Channel
Extruded, American Standard
Round Tube
Extruded Seamless
Extruded Drawn Structural
One of the most versatile of heat-treatable alloys, good formability and high resistance to corrosion, medium strength relative to 2000 or 7000 alloys.
Shapes/Form and Manufacturing Methods Available
Round Bar
Cold Finished
Hex Bar
Cold Finished
Plate
Standard Mill Finish
6063
High corrosion resistance, medium strength, good natural finish
Shapes/Form and Manufacturing Methods Available
Rectangle Bar
Extruded
Angle
Extruded, Sharp Corner
Channel
Extruded, Aluminum Association
Round Tube
Extruded
Square Tube
Extruded
High corrosion resistance, medium strength, good natural finish
Shapes/Form and Manufacturing Methods Available
Round Fluted Tube
Extruded
High corrosion resistance, medium strength, good natural finish
Shapes/Form and Manufacturing Methods Available
Rectangle Bar
Extruded
Round Tube
Extruded
Round Pipe
Schedule 10 – Extruded Seamless
Schedule 40 – Extruded Seamless
High corrosion resistance, medium strength, good natural finish
Shapes/Form and Manufacturing Methods Available
Round Tube
Extruded Round Seamless
6101
Alloy 6101 is a heat treatable wrought alloy best suited for applications involving moderate strength and maximum electrical conductivity.
Shapes/Form and Manufacturing Methods Available
Rectangle Bar
Full Round Edge Bus Bar – Extruded
Round Pipe
Schedule 80 – Extruded
Schedule 40 – Extruded
Alloy 6101 is a heat treatable wrought alloy best suited for applications involving moderate strength and maximum electrical conductivity.
Shapes/Form and Manufacturing Methods Available
Rectangle Bar
Full Round Edge Bus Bar – Extruded
6262
Alloy 6262 can be used in place of 2011 when higher corrosion resistance and better anodizing response is required.
Shapes/Form and Manufacturing Methods Available
Hex Bar
Cold Finished
Extruded
Round Tube
Extruded Seamless
Alloy 6262 can be used in place of 2011 when higher corrosion resistance and better anodizing response is required.
Shapes/Form and Manufacturing Methods Available
Round Tube
Extruded
7022
7022 aluminum: the main alloying addition is zinc and it is formulated for primary forming into wrought products. It has the lowest electrical conductivity relative to other 7000-series alloys in the database.
Shapes/Form and Manufacturing Methods Available
Half Round Bar
Extruded
7050
Aluminium alloy 7050, an aerospace grade of aluminium, combines high strength, stress corrosion cracking resistance, and toughness.
Shapes/Form and Manufacturing Methods Available
Plate
Aircraft quality – USI Tested
Aircraft quality – USI Tested, Type 1
7075
One of the strongest and hardest aluminum alloys available, good machinability, fair corrosion resistance, excellent finishing characteristics.
Shapes/Form and Manufacturing Methods Available
Round Bar
Cold Finished
Rectangle Bar
Cold Finished
Plate
USI Tested
Non USI Tested
One of the strongest and hardest aluminum alloys available, good machinability, fair corrosion resistance, excellent finishing characteristics.
Shapes/Form and Manufacturing Methods Available
Round Bar
Cold Finished
Square Bar
Cold Finished
Rectangle Bar
Cold Finished
Plate
USI Tested
Non USI Tested
One of the strongest and hardest aluminum alloys available, good machinability, fair corrosion resistance, excellent finishing characteristics.
Shapes/Form and Manufacturing Methods Available
Sheet
Clad Sheet
Bare Sheet
One of the strongest and hardest aluminum alloys available, good machinability, fair corrosion resistance, excellent finishing characteristics.
Shapes/Form and Manufacturing Methods Available
Sheet
Clad Sheet
Cast Tooling Plate
Aluminum MIC-6 ® is cast plate known for its stability and consistency between plates. It is also commonly used for tooling and base plates.
Shapes/Form and Manufacturing Methods Available
Plate
Cast Aluminum Tooling Plate
ACP 5080 cast precision plate product has an excellent dimensional stability. The low level of internal stress reduces the plate deformation during and after machining
Shapes/Form and Manufacturing Methods Available
Plate
Cast Aluminum Precision Plate
Mold Materials
Alloy 2618 alloy has good machining characteristics. It can be smoothly machined in heat treated conditions.
Shapes/Form and Manufacturing Methods Available
Plate
Cast Aluminum Mold Plate
This high strength 7xxx series aluminum alloy has been developed to specifically resist the occurence of exfoliation corrosion normally found in blow mold water lines. This resistance to exfoliation corrosion will minimize the problems of cracked molds and waterline damage. Its mechanical any physical properties are equal to or greater than 7075-T651 with no softness in the center of the material as is common to 7075. It is produced to a minimum of .030 inch of the normal thickness.
Shapes/Form and Manufacturing Methods Available
Plate
Aluminum Mold Plate
QC-10® is a very high strength 7xxx series aluminum mold plate especially developed for the injection mold and blow mold industries. It combines the highest strength and hardnessby thickness of any aluminum mold product and maintains very high thermal conductivity.
The product has very low quench sensitivity, therefore it has very uniform through-thickness, hardness and strength, even in very thick sections. This results in very good stability when machining. QC-10® also has superior corrosion resistance for a 7xxx series alloy. It is produced to a minimum of .030 inch over the nominal thickness.
Shapes/Form and Manufacturing Methods Available
Plate
Aluminum Mold Plate